CH-331H-RX - HDMI AP over IP Receiver (1080p)
This HDMI AP over IP Receiver (1080p) allows you to receive extended HDMI signals using the TCP/IP protocol over regular Cat.5e network cable. This extender supports the reception of High-Definition signals (up to 1080p@60Hz) with audio up to 100m over a single cable. The distance can be further extended (up to 100m per segment) by using Gigabit Ethernet network switches, allowing the user to cascade the system without signal loss or introducing delay. This Receiver also features bi-directional IR and RS-232 pass-through.
It is also possible to for this Receiver to operate in multicast mode, allowing large groups of Receivers within the same local network to receive the same AV signal with no additional bandwidth cost. Additionally, that same multicast signal can be used to create large multi-display video walls with amazing simplicity.
This Video over IP system is perfect for both residential and commercial installation environments. Configuration information is provided via the On-Screen Display (OSD) when the unit is unlinked and control is via front panel buttons, WebGUI, Telnet, or the AV over IP Master Controller.
HDMI 1.4 and DVI 1.0 compliant
HDCP 1.4 compliant
1 HDMI output
Video, audio and control reception over TCP/IP in Unicast (point- to-point) or Multicast (single-to-many) modes
Multi-monitor video wall support with 180° and 270° rotation options
Video output can be scaled to a selected resolution, or left unscaled
HDMI output supports resolutions up to 1080p@60Hz/WUXGA
Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream
Supports IR and RS-232 bypass
Unit has an info OSD (when unlinked) and can be controlled via front panel buttons, WebGUI, Telnet, and the AV over IP Master Controller
1x RJ-45 [1x HDMI & Propriety Data]
1x 3.5mm [1x Infrared Receiver]
1x HDMI [1x Uncompressed AV and Data]
1x 3.5mm [1x Infrared Emitter]
1x 3.5mm [1x RS-232]
Dimensions 128mm [W] x 116mm [D] x 25mm [H]
Net Weight 362g