NEW and HOT Products
- 2021 -
CV/SV, VGA PC and Component Splitters / Switchers / Boosters / Equalisers
Multisystem TV Pattern Generators
Digital Mixers / Time Base Correctors
Video Scalers
HDMI/DVI Video Splitters/ Switcher/ Booster/ Equalizers
Video Format Converters
HDMI/DVI Signal Format Converters
Colour Quad, Video Wall and PIP Processors
PC Multimedia
Digital and Analog Audio Format Converters
CAT5e/6/7, Optical Fibre, Co-Axial Cable Products
Other Products
New Product
CEC / EDID / IR / IP / Wall Plate Controllers
View All
Cypress Technical Information
Contact Us

Product Search


Purchase Here

New Products
CAT5e/6/7, Optical Fibre, Co-Axial Cable Products
Make An Inquiry

CHDBT-1H1CPLV - UHD+ HDMI in & HDMI/HDBaseT out Splitter

​This 1 by 2 UHD+ HDMI in & HDMI/HDBaseT out Splitter can take a single 4K source and simultaneously deliver it to a local HDMI display as well as to a second HDMI display up to 40m away via HDBaseT. This unit complies with the advanced HDCP 2.2 and HDMI 2.0 standards, as well as supporting the legacy HDCP 1.x and HDMI 1.x standards. The HDMI input and output supports uncompressed 4K UHD HDMI sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR while the HDBaseT output, despite its 10.2Gbps bandwidth limitation, is able to process and extend the same high bandwidth sources by the use of AVLC (Adaptive Visually Lossless Compression) when connected to a compatible AVLC Receiver.

Built-in EDID management functionality enables the unit to fit into every situation. The HDBaseT output of this unit can also provide 48V PoH (Power over HDBaseT) to a compatible Receiver, allowing for greater flexibility within different installation scenarios. The unit can be controlled via a front panel button and RS-232.

​HDMI 2.0 and HDBaseT 1.0 compatible
HDCP 1.x and HDCP 2.2 compliant
1 HDMI input
1 HDMI and 1 HDBaseT output
Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input and output
Note: Support of resolutions requiring bandwidth above 10.2Gbps via HDBaseT requires a compatible AVLC Receiver.
Supports Deep Color input and output up to 12-bit
Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output
Supports CEC bypass
HDBaseT feature support: HD Video and Audio, 48V PoH (PSE) and Control (bi-directional IR/RS-232 pass-through)
HDBaseT output transmits video, audio and data over a single Cat.5e/6/7 cable and can reach distances up to 40m/131ft at 4K when using Cat.6a/7
Integrated AVLC (Adaptive Visually Lossless Compression) activates when the bandwidth requirements of the source are beyond 10.2Gbps (340MHz) allowing for support of sources up to 18Gbps (600MHz) with no loss of visual quality
Automatic 4K to 1080p down-scaling or color space conversion (4:4:4 to 4:2:0), as necessary, based on each connected display’s EDID
Supports pass-through of many audio formats including LPCM 2.0/5.1/7.1, Bitstream, and HD Bitstream
EDID management allows selection of an internal EDID, user EDID, or EDID copied from a connected display
Supports standard 48V PoH from the unit to a connected HDBaseT Receiver (compatible Receivers only)
Note: The 48V PoH function is designed for powering compatible Receiver units only. Non-PoH Receivers will need their own power supply. Receivers from other brands may not be compatible.
Controllable via a front panel button and RS-232

1x HDMI [1x Uncompressed AV and Data]
1x RJ-45 [1x HDMI & Propriety Data]
1x 3.5mm [1x Infrared Receiver]
1x DE-9 [1x RS-232 Data]
1x RJ-45 [1x IP Control]
1x HDMI [1x Uncompressed AV and Data]
1x 3.5mm [1x Infrared Emitter]
PSU: 24V/2.7A
Dimensions 231mm [W] x 115mm [D] x 25mm [H]
Net Weight 656g

UHD+ HDMI in & HDMI/HDBaseT out Splitter - Front View UHD+ HDMI in & HDMI/HDBaseT out Splitter - Back View