Products
NEW and HOT Products
- 2019 -
CV/SV, VGA PC and Component Splitters / Switchers / Boosters / Equalisers
Multisystem TV Pattern Generators
Digital Mixers / Time Base Correctors
Video Scalers
HDMI/DVI Video Splitters/ Switcher/ Booster/ Equalizers
Video Format Converters
HDMI/DVI Signal Format Converters
Colour Quad, Video Wall and PIP Processors
PC Multimedia
Digital and Analog Audio Format Converters
CAT5e/6/7, Optical Fibre, Co-Axial Cable Products
Other Products
SDI
New Product
CEC / EDID / IR / IP / Wall Plate Controllers
View All
Cypress Technical Information
Contact Us

Product Search

Search

Purchase Here


 
New Products
CEC / EDID / IR / IP / Wall Plate Controllers
Make An Inquiry

CDPS-CS7S - AV over IP Master Controller

This controller is a powerful and flexible solution for controlling multiple VoIP (Video over IP) extenders within same network. The user only needs to install this unit into the same local network as the extenders (Transmitter and Receiver) to easily define and configure channel routing selections using the WebGUI. It is also possible to define and switch routes using customized groups or presets allowing for easy control over multiple video zones. Without the use of this controller, each individual Transmitter and Receiver pair could only be configured in a basic point-to-point operational mode.

Additionally, this unit supports controlling the matrix, video wall, and multiviewer modes of connected VoIP units. The settings of all connected Transmitter/Receiver units, including IP address, netmask and extender status are clearly displayed within the WebGUI. The WebGUI is easily accessed via a web browser over a normal network connection or by directly connecting an HDMI display and USB keyboard & mouse to the unit. A trigger input interface is also provided to allow the easy addition of a remote control keypad, or other
trigger-supporting products, which can be installed within a podium or within a table in a conference room or classroom. This interface can allow the user to activate stored presets with the simple press of a button. Standard control is available via WebGUI (remote or local), RS-232, Telnet, IR Remote and triggers.

SPECIFICATIONS:
Inputs
1x Terminal Block 2-pin [1x Trigger]
3x 1-Pin Terminal Block [1x KEYBOARD / MOUSE / SERVICE Propriety Data [1x USB Type-A] RS-232]
1x 3.5mm [1x Infrared Receiver]
Outputs
1x HDMI [1x Uncompressed AV and Data]
1x HDMI [1x LAN 2 IP Control [1x RJ-45] Uncompressed AV and Data]
1x HDMI [1x LAN 1 (PoE) IP Control [1x RJ-45] Uncompressed AV and Data]
3x 1-Pin Terminal Block [1x RS-232]
1x DisplayPort [1x RESERVED CONTROL [1x Terminal Block 5-pin] Uncompressed AV]
PSU: 5V/2.6A
Dimensions 231mm [W] x 25mm [D] x 117mm [H]
Net Weight 250g


AV over IP Master Controller - Front View AV over IP Master Controller - Back View