The Digital/Analog Audio Amplifier with Microphone and CAT5e/6/7 Inputs is designed to mix the audio from the analog, digital optical or AUDIO CAT inputs with the analog microphone input and output to analog speaker in mono or stereo sound. The AUDIO CAT input allows the user to use both digital and analog audio sources at distances up to 300m away over CAT5e/6/7 using a compatible transmitter. IP (Telnet/WebGUI) and on-panel controls with LED indication allow the user easy adjustment and control over the audio settings.

SPECIFICATIONS:
Supports digital-to-analog audio conversion (DAC)
Supports optical input sampling rates up to 192kHz
Supports optical, analog L/R, AUDIO-CAT and 48V/Line microphone inputs
Supports AUDIO CAT transmitter input up to 300m over CAT5e/6/7 cable
Supports up to 50W per channel speaker output
Sound output up to 20dB
Supports microphone sound up to 18dB
Supports stereo or mono output
Supports volume control from on-panel, Telnet or WebGUI
Use single button for input source switching
Supports RS-232 input control for Baud rate 115200bps
Supports sound mixing of the microphone into the analog sound output
Supports individual microphone input
Inputs 1x TOSLINK [1x OPTICAL 2 Channel LPCM]
3x 1-Pin Terminal Block [1x Stereo (L/R)]
3x 1-Pin Terminal Block [1x Microphone]
1x RJ45 [1x AUDIO-CAT Digital Audio Propriety Data / Propriety Data]
1x RJ45 [1x IP Control]
1x USB Type A [1x SERVICE Propriety Data]
Outputs 6x 1-Pin Terminal Block [1x Speaker Out (L/R)]
PSU: 24V/2.7A
Dimensions 109mm [W] x 157mm [D] x 48mm [H]
Net Weight 644g