Products
NEW and HOT Products
- 2018 -
Video System Converters
Multisystem TV Pattern Generators
Digital Mixers / Time Base Correctors
Video Scalers
HDMI/DVI Video Splitters/ Switcher/ Booster/ Equalizers
Video Processors
HDMI/DVI Signal Format Converters
Colour Quad and PIP Processors
PC Multimedia
Audio and Video Format Converters
CAT 5/CAT 6 Products
Other Products
SDI
New Product
View All
Cypress Technical Information
Contact Us

Product Search

Search

Purchase Here


 
New Products
New Product
Purchase Here

CDPS-CS7 - IP Manager and Controller

This controller is a powerful and flexible solution for controlling multiple Video over IP (VoIP) extenders within same network. The user only needs to install this unit into the same local network as the extenders (Transmitter and Receiver) to easily define and configure channel routing selections, for both unicast and multicast scenarios, using the WebGUI. It is also possible to define and switch routes using customized groups or presets allowing for easy control over multiple video zones. Without the use of this centralized unit, each individual Transmitter and Receiver in the system would need to be controlled and configured directly through their own WebGUI.

Additionally, this unit supports controlling the matrix and video wall modes of connected VoIP units. The settings of all connected Transmitter/Receiver units, including IP address, netmask and extender status are clearly displayed within the WebGUI. The WebGUI is easily accessed via a web browser over a normal network connection or by directly connecting an HDMI display and USB keyboard & mouse to the unit. A trigger input interface is also provided to allow the easy addition of a remote control keypad, or other trigger-supporting products, which can be installed within a podium or within a table in a conference room or classroom. This interface can allow the user to activate stored presets with the simple press of a button. Standard control is available via WebGUI (remote or local), RS-232, Telnet and IR Remote.

Specifications:
Enables the management and configuration of multiple compatible Video over IP (VoIP) extenders through a single WebGUI
Supports point-to-point (unicast) and multi-to-multi (multicast) routing selections
Control over both matrix and TV wall modes using WebGUI presets
Definable display groups
WebGUI clearly displays the status of all connected Transmitters and Receivers, including IP address, channel selection, etc.
HDMI output displays the WebGUI and system status
Supports the use of a USB mouse and keyboard to locally control the WebGUI (Optional)
Can be powered by Ethernet switches supporting the IEEE 802.3af-2003 PoE standard (Optional)
Trigger Control Keypad support for easy, single-button, preset activation (Optional)
Standard control is available via WebGUI (remote or local), RS-232, Telnet, and IR Remote

Inputs
1x USB Type A [1x KEYBOARD / MOUSE / SERVICE Propriety Data]
5x 2-Pin Terminal Block [5x Trigger]
1x 3.5mm Stereo Mini-jack [1x Infrared Receiver]
Outputs
1x HDMI [1x Uncompressed AV and Data]
1x RJ45 [1x LAN 1 (PoE) IP Control]
1x RJ45 [1x LAN 2 IP Control]
3x 1-Pin Terminal Block [1x RS-232]
1x 5-Pin Terminal Block [1x RESERVED CONTROL]
PSU: 5V/2.6A
Dimensions 231mm [W] x 117mm [D] x 25mm [H]
Net Weight 250g


IP Manager and Controller - Front View IP Manager and Controller - Back View