Products
NEW and HOT Products
- 2025 -
CV/SV, VGA PC and Component Splitters / Switchers / Boosters / Equalisers
Multisystem TV Pattern Generators
Digital Mixers / Time Base Correctors
Video Scalers
HDMI/DVI Video Splitters/ Switcher/ Booster/ Equalizers
Video Format Converters
HDMI/DVI Signal Format Converters
Colour Quad, Video Wall and PIP Processors
PC Multimedia
Digital and Analog Audio Format Converters
CAT5e/6/7, Optical Fibre, Co-Axial Cable Products
Other Products
SDI
New Product
CEC / EDID / IR / IP / Wall Plate Controllers
View All
Cypress Technical Information
Contact Us

Product Search

Search

Purchase Here


 
New Products
CAT5e/6/7, Optical Fibre, Co-Axial Cable Products
Make An Inquiry

CH-2603RX - HDMI over HDBaseT 2.0 4K UHD+ Receiver (PSE) with Balanced Audio Breakout and Bi-directional USB Configuration

This HDBaseT 2.0 receiver is designed for use in environments needing a wide range of flexibility when it comes to inputs, outputs, and control. With a 2 by 2 matrix arrangement of HDBaseT & HDMI inputs and dual HDMI outputs this Receiver can handle a variety of source routing scenarios. The HDMI input and outputs support resolutions up to a maximum of 4K@60Hz (4:4:4, 8-bit) while the HDBaseT input supports resolutions up to a maximum of 4K@60Hz (YUV 4:2:0, 8-bit). A balanced analog stereo audio breakout is also provided (LPCM 2.0 sources only) allowing for professional local powered speakers to be easily added to the system. The HDBaseT input not only supports video and audio but also bidirectional Ethernet, RS-232, USB, and IR.

When paired with this unit’s standard Transmitter, up to 3 switchable USB 2.0 host (Type-B) connections are available (2 on the Transmitter, 1 on the Receiver) which connect to up to 6 USB 2.0 (Type-A) device ports (3 on the Transmitter, 3 on the Receiver) for a multi-source, bidirectional, and highly flexible KVM configuration (Note: Only 1 USB host may be active at a time).

This Receiver (PSE) can provide 48V PoH (Power over HDBaseT) power to the connected HDBaseT Transmitter (PD) (compatible Transmitters only), allowing for greater flexibility within different installation scenarios. This unit is controllable via front-panel controls, WebGUI, Telnet, and RS-232.

SPECIFICATIONS:
HDMI with 18Gbps (600MHz), 3D & 4K video support; HDBaseT 2.0 compatible
HDCP 1.x & 2.2 compliant
Selectable HDMI and HDBaseT inputs
HDMI input supports resolutions up to 4K@60Hz (4:4:4, 8-bit)
HDBaseT input supports resolutions up to 4K@60Hz (YUV 4:2:0, 8-bit)
HDMI output supports resolutions up to 4K@60Hz (4:4:4, 8-bit)
2×2 matrix switching (both HDMI outputs are independent)
Supported HDBaseT features: HD video and audio, 100BaseT Ethernet, 48V PoH, and control (bidirectional IR/RS-232/USB pass-through)
Supports pass-through of LPCM 2.0/5.1/7.1, Bitstream & HD Bitstream audio formats
Balanced analog stereo audio breakout
Flexible USB host selection using front panel buttons
Multiple USB hosts may be connected at once (up to 3 total, between the Tx and a compatible Rx unit) with a single selected host active at a time
Supports 48V PoH from Receiver (PSE) to Transmitter (PD) (compatible Transmitters only)
Controllable via front panel buttons, WebGUI, Telnet, and RS-232

Inputs 1x HDMI [1x Uncompressed AV and Data]
1x RJ-45 [1x HDMI & Propriety Data]
1x 3.5mm [1x Infrared Receiver]
1x USB Type-B [1x Propriety Data]
1x 3.5mm [1x RS-232]
Outputs 2x HDMI [2x Uncompressed AV and Data]
1x Terminal Block 5-pin [1x Stereo (Balanced)]
1x 3.5mm [1x Infrared Emitter]
3x USB Type-A [3x Propriety Data]
3x 1-Pin Terminal Block [1x RS-232]
1x RJ-45 [1x Propriety Data]
PSU: 24V/3.75A
Dimensions 231mm [W] x 163mm [D] x 25mm [H]
Net Weight 895g


HDMI over HDBaseT 2.0 4K UHD+ Receiver (PSE) with Balanced Audio Breakout and Bi-directional USB Configuration - Front View HDMI over HDBaseT 2.0 4K UHD+ Receiver (PSE) with Balanced Audio Breakout and Bi-directional USB Configuration - Back View