Products
NEW and HOT Products
- 2018 -
Video Splitters / Switchers / Boosters / Equalisers
Multisystem TV Pattern Generators
Digital Mixers / Time Base Correctors
Video Scalers
HDMI/DVI Video Splitters/ Switcher/ Booster/ Equalizers
Video Format Converters
HDMI/DVI Signal Format Converters
Colour Quad and PIP Processors
PC Multimedia
Audio and Video Format Converters
CAT5e/6/7, Optical Fibre, Co-Axial Cable Products
Other Products
SDI
New Product
CEC / EDID / IR Controllers
View All
Cypress Technical Information
Contact Us

Product Search

Search

Purchase Here


 
4K UHD 1×4 HDMI Splitter with CEC System Reset
The 1 by 4 HDMI Splitter distributes a single HDMI input to four simultaneous HDMI outputs and supports 4K2K, 3D, 12-bit Deep Color as well as High Definition Lossless Audio. With its 9 Gbps bandwidth and the additional features of the latest in HDMI standards you can be sure of superior HDMI distribution.
VGA Input Model
This input module enables the connection of up to 8 VGA sources to the modular matrix. Resolutions from VGA to WUXGA@60Hz (RB) are supported, and each VGA input has an assigned 2.5mm stereo audio input allowing audio signal from each source to be combined with the video signal and routed to any output module of the modular matrix.
8*HDMI output
This output module enables the connection of up to 8 HDMI displays to the modular matrix. Resolutions up to 1080p@60Hz or WUXGA@60Hz (RB), and 3D signals are supported along with high-definition audio transmission including LPCM 7.1CH, Dolby Digital Plus, Dolby True HD, and DTS Master Audio. HDMI outputs support cable lengths of up to 15m@1080p/8-bit or 10m@1080p/12-bit.
3x2 4K UHD+ HDMI / Fiber Matrix
This 3×2 HDMI and Fiber Matrix allows customer to route up to three HDMI input signals (two 18Gbps HDMI and one 10.2Gbps HDMI over optical fiber) to any of two HDMI outputs (one 18Gbps HDMI and one 10.2Gbps optical fiber). The optical fiber input and output both support transmission distances up to 300 meters and use paired LC connectors. This unit supports resolutions up to 4K@60Hz (4:4:4, 8-bit), 16-bit Deep Color up to 1080p@60Hz, HDR (High Dynamic Range), HD audio formats and other features defined by the HDMI 2.0 specification. HDMI sources with bandwidth higher than 10.2Gbps are automatically chroma and/or bit-depth subsampled for transmission over the fiber output. Six pre-defined internal EDIDs and two external EDID selections are available for EDID management. The unit provides intuitive front panel controls as well as RS-232, Telnet, WebGUI and IR remote control options.

4x4 HDMI 4K Matrix
The 4 by 4 HDMI 4K UHD Matrix is capable of switching and routing an HDMI signal from any of its four sources to any of four connected HDMI displays, allowing any source to be shown independently on any display. It supports 3D, 'Deep Color' and high-definition lossless audio formats. Control of inputs and outputs can be easily operated through the on-panel buttons, IR remote control, RS-232 or Telnet/WebGUI control.
4x4 HDMI 4K over CAT5e/6/7 Matrix with 24v PoC
The 4 by 4 HDMI 4K UHD over CAT5e/6/7 Matrix supports the transmission of video (resolutions up to 4K2K and Full HD), multichannel digital audio and control via IR, RS-232, Telnet or Web GUI from four high definition sources to four HDBaseT™ outputs over a single CAT5e/6/7 cable (up to 60m at 1080p and 35m at 4K2K) for each output. It supports passthrough of high resolution digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3D TV and 3D source. Additionally, the Power over Cable (PoC) function can power compatible Receivers, providing greater flexibility in installations.
8x8 HDMI 4K UHD Matrix with 6G Capability
This 8 by 8 Matrix provides the ability to connect up to eight 4K UHD HDMI sources to up to eight 4K UHD HDMI displays and freely switch between them. This unit comes with full support for 18Gbps (600Mhz) resolutions up to, and including 4K@60Hz (4:4:4, 8-bit) as well as support for 16-bit Deep Color up to 1080p60Hz, HDR (High Dynamic Range), HD audio and other features defined by the HDMI 2.0a specification. With a comprehensive EDID management feature that includes the ability to select between built in default EDID, EDID copied from connected sink devices, as well as a configurable EDID, this matrix can solve many interconnectivity problems.
1x4 DVI Splitter
‚ÄčThe DVI Splitter series are high performance, HDCP compliant DVI distribution amplifiers. It allows one DVI signal source to be split to up to four identical buffered outputs for connecting DVI displays simultaneously. These models can be used to transfer HDMI™ signals by using an HDMI to DVI adaptor or cable. Each of the buffered outputs can be run up to 15 meters and can be cascaded.

4x2 HDMI Switcher
‚ÄčThe 4x2 HDMI switch allows four HDMI sources such as DVD/BLU-Ray players to send audio/video signals to two HDMI displays. Thanks to the included remote control you no longer have to manually connect your various gadgets, all you have to do is plug them into the CLUX-4S2 and using the remote decide which source goes to which display. Helping you switch between various HDMI devices with ease, the CLUX-4S2 HDMI switch is a sleek and stylish device that solves your HDMI switching needs.
6x2 HDMI 4K UHD Matrix with 6G Capability
This matrix provides the ability to connect up to six 4K UHD HDMI sources to up to two 4K UHD HDMI displays and freely switch between them. This unit comes with full support for 18Gbps (600MHz) resolutions up to, and including 4K@60Hz (4:4:4, 8-bit) as well as support for 16-bit Deep Color (up to 1080p60), HDR (High Dynamic Range), HD audio and other features defined by the HDMI 2.0 specification. With a comprehensive EDID management feature that includes the ability to select between six built in default EDIDs, or an EDID copied from a connected sink device, this matrix can solve many interconnectivity problems. Added flexibility comes from the ability to extract audio from each HDMI output’s source and output it as optical digital audio (LPCM 2.0 and standard Bitstream only). Six fully configurable presets are also provided to simplify the routing process. This unit provides an intuitive set of front panel controls with associated LCD, as well as RS-232, Telnet, WebGUI, and IR remote control options.
DVI to DVI Repeater with EDID Control
This unit is a handy device for your DVI signal management toolbox. With single-link DVI and 3G HDMI bandwidth, as well as multiple EDID selection options, this unit provides you with a fast and efficient way to manage your DVI signal. This unit allows you to capture the EDID of a monitor to your PC, or upload a previously captured EDID from your PC, and use it as a custom user EDID to help solve compatibility issues within your system. The currently active EDID can be easily selected using a convenient button on the front of the unit.
4 x 1 HDMI 4K UHD+ Switcher
This switcher is the most advanced HDMI solution for true Ultra High-Definition (UHD) signal distribution. This unit allows for the switching of any of four 6G HDMI input signals to a single 6G HDMI display. With support for resolutions up to 4K@60Hz (YUV 4:4:4), 36-bit Deep Color, HD audio as well as other features defined by the HDMI 2.0 specification. Multiple control interfaces are available including RS-232, IR remote, and front-panel buttons making operation easy and intuitive. Additionally, the Auto Switching function can detect source is connected or turned on and automatically switch to that input, or revert to the previous input once the current source is turned off or disconnected.