The 1 by 4 HDMI Splitter distributes a single HDMI input to four simultaneous HDMI outputs and supports 4K2K, 3D, 12-bit Deep Color as well as High Definition Lossless Audio. With its 9 Gbps bandwidth and the additional features of the latest in HDMI standards you can be sure of superior HDMI distribution.

The Cooling Fan System is a specialized version of the 3U/6U tray design with 3 side covers and a place to mount the cooling fan to provide additional cooling to your installation.

The Cooling Fan System is a specialized version of the 3U/6U tray design with 3 side covers and a place to mount the cooling fan to provide additional cooling to your installation.

These utility trays provide a flexible way to mount non-rackmount or non-standard equipment and accessories within the 3U/6U Rack Chassis. Each shelf contains vent holes designed to allow the free circulation of air around any attached gear and can help lower the overall temperature within the Rack Chassis. The front and back of the standard tray is open to allow for the easy connection of cables and to monitor the device(s).

These utility trays provide a flexible way to mount non-rackmount or non-standard equipment and accessories within the 3U/6U Rack Chassis. Each shelf contains vent holes designed to allow the free circulation of air around any attached gear and can help lower the overall temperature within the Rack Chassis. The front and back of the standard tray is open to allow for the easy connection of cables and to monitor the device(s).

This HDMI over single Cat.5e/6/7 Transmitter and Receiver set is a great solution for extending uncompressed HD audio and video as well as Ethernet and control via a single run of Cat.5e/6/7 cable over distances of up to 100 meters. Multiple data and control interfaces are provided, including IR, RS-232 and LAN connections. This extender set complies with the advanced HDCP 2.2 and HDMI 2.0 standards, as well as supporting the legacy HDCP 1.x and HDMI 1.x standards. Despite HDBaseT’s 10Gbps bandwidth limitation, 4K UHD HDMI video, up to and including 4K@60Hz (4:4:4), is able to be processed and extended by subsampling 4:4:4 color to 4:2:0 and reducing bit depth when necessary. Beyond video, data, and control these units also feature useful audio features. The Optical Audio Return (OAR) feature supports transmitting optical audio from the Receiver side to the Transmitter side for local playback. An audio insertion feature is also included, allowing for stereo analog audio to be embedded into the HDMI output signal. Rounding out the feature set is robust EDID management as well as automatic HDBaseT clock stretching and TMDS re-clocking support. The Receiver (PD) is powered by 48V PoH provided by the Transmitter (PSE), allowing for greater flexibility within different installation scenarios.

This input module enables the connection of up to 8 VGA sources to the modular matrix. Resolutions from VGA to WUXGA@60Hz (RB) are supported, and each VGA input has an assigned 2.5mm stereo audio input allowing audio signal from each source to be combined with the video signal and routed to any output module of the modular matrix.

This output module enables the connection of up to 8 HDMI displays to the modular matrix. Resolutions up to 1080p@60Hz or WUXGA@60Hz (RB), and 3D signals are supported along with high-definition audio transmission including LPCM 7.1CH, Dolby Digital Plus, Dolby True HD, and DTS Master Audio. HDMI outputs support cable lengths of up to 15m@1080p/8-bit or 10m@1080p/12-bit.

This input module comprises 8 HDBaseT connections which allows the transmission of HD sources, bi-directional IR and RS-232 signals, PoC (Power over Cable), and LAN serving over single runs of CAT5e/6/7 cables up to 100m@1080p (8-bit/12-bit) or 70m@4K. Resolutions up to 4K@30Hz or WUXGA@60Hz (RB), and 3D signals are supported along with LPCM 7.1CH, Dolby Digital Plus, Dolby True HD, and DTS Master Audio.

This controller is a powerful and flexible solution for controlling multiple Video over IP (VoIP) extenders within same network. The user only needs to install this unit into the same local network as the extenders (Transmitter and Receiver) to easily define and configure channel routing selections, for both unicast and multicast scenarios, using the WebGUI. It is also possible to define and switch routes using customized groups or presets allowing for easy control over multiple video zones. Without the use of this centralized unit, each individual Transmitter and Receiver in the system would need to be controlled and configured directly through their own WebGUI.

This 8-Port Managed 5V DC Power Supply is a DC power splitter which can distribute up to 3 amps of 5 volt power to up to eight connected devices via 2-pin terminal block connections (120 watts total across all 8 outputs). Ideal for professional applications, this unit provides direct per-port power control via WebGUI, Telnet or RS-232. An integrated, battery backed-up, clock allows for detailed power scheduling based on a repeating daily/weekly schedule, or single events. Up to 2 fans may be connected and their speed can be either automatically controlled based on a detected temperature, or set to a single static speed. Detailed status information about the power input, each power output, current fan speed, and system temperature is provided to give a comprehensive system overview.

This multi-input scaler has HDMI, as well as Composite Video, Component Video, and PC (VGA) inputs which can be freely selected for output at a scaled resolution of the user’s choosing over the mirrored HDMI, HDBaseT and VGA outputs. This unit also includes analog and digital audio outputs to provide additional playback flexibility. Support for HDMI output resolutions up to 1080p/WUXGA (RB) and Analog to Digital Conversion (ADC) functionality combine to allow for a wide range of AV signals to be displayed on the connected displays. The HDBaseT output provides a great solution to extend your audio and video up to 70 meters over a single run of Cat.5e/6/7 cable. The HDBaseT output can provide 48V PoH power to compatible HDBaseT Receivers. The unit can be controlled via front panel buttons with an On-Screen Display (OSD), WebGUI, IR remote, Telnet, and RS-232 making it exceptionally versatile.