This unit is an HDMI AP over IP Transmitter that allows you to extend HDMI signals using the TCP/IP protocol over regular Cat.5e network cable. This extender supports the transmission of High-Definition signals (up to 1080p@60Hz) with audio up to 100m on a single cable. The transmission distance can be further extended (up to 100m per segment) by using Gigabit Ethernet network switches, allowing the user to cascade the system without signal loss or introducing delay. This Transmitter also features bi-directional IR and RS-232 pass-through.

It is also possible to for this Transmitter to operate in multicast mode, allowing you to send a single AV signal to a large number of Receivers within the same local network with no additional bandwidth cost. Additionally, that same multicast signal can be used to create large multi-display video walls with amazing simplicity.

This Video over IP system is perfect for both residential and commercial installation environments. Configuration information is provided via the On-Screen Display (OSD) on connected (but unlinked) Receivers and control is via WebGUI, Telnet, or the AV over IP Master Controller.

SPECIFICATIONS:
HDMI 1.4 and DVI 1.0 compliant
HDCP 1.4 compliant
1 HDMI input
Video, audio and control transmission over TCP/IP in Unicast (point- to-point) or Multicast (single-to-many) modes
Multi-monitor video wall support with 180° and 270° rotation options
HDMI input supports resolutions up to 1080p@60Hz/WUXGA
Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream
Supports IR and RS-232 bypass
Unit can be controlled via WebGUI, Telnet, and the AV over IP Master Controller

Inputs
1x HDMI [1x Uncompressed AV and Data]
1x 3.5mm [1x Infrared Receiver]
1x 3.5mm [1x RS-232]
Outputs
1x RJ-45 [1x Propriety Data]
1x 3.5mm [1x Infrared Emitter]
PSU: 5V/2.6A
Dimensions 128mm [W] x 116mm [D] x 25mm [H]
Net Weight 364g