|
CH-U331RX - HDMI over IP Receiver with USB connection This transmitter and receiver set allows you to transmit HDMI or VGA signals over Cat.5e/6/7 network cable. This extender supports the transmission of Ultra High-Definition signals (up to 4K@30Hz, 4:4:4 or 4K@60Hz, 4:2:0) with audio and USB up to 100 meters on a single cable. The transmission distance can be further extended (up to 100 meters per segment) by using gigabit network switches, allowing the user to cascade the system without signal loss or introducing delay. It is also possible to have the Transmitter operate in multicast mode, allowing you to send a single AV signal to a large number of Receivers within the same local network. Additionally, that same multicast signal can be used to create large multi-display video walls with amazing simplicity. This system is perfect for both residential and commercial installation environments. This system also features bi-directional IR and RS-232 pass-through, analog line level in/out, and a microphone input (on the Receiver), providing the user with a variety of audio options. The USB functionality allows the system to act like a remote USB hub which, when combined with the VGA input/output feature, provides a flexible remote KVM platform. Configuration information is provided via On-Screen Display (OSD) and control is by WebGUI, Telnet, and front panel controls. SPECIFICATIONS: HDMI 2.0 and DVI 1.0 compatible HDCP 1.4 & 2.2 compliant 1 HDMI input, 1 VGA input & 1 VGA bypass output (Transmitter) 1 HDMI output, 1 VGA output (Receiver) Video, audio, and control transmission over TCP/IP in Unicast (point-to-point) or Multicast (single-to-many) modes Multi-monitor video wall support with 90° rotation HDMI input resolutions up to 4K@60Hz (4:2:0, 8-bit) or 4K@30Hz (4:4:4, 8-bit) HDMI output resolutions up to 4K@30Hz (RGB, 8-bit) Note: 4K@50/60Hz (4:2:0) sources are automatically converted to 4K@25/30Hz (RGB) for output. VGA input and output resolutions up to WUXGA (RB) Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, and Bitstream over HDMI Note: The optical output can only support LPCM 2.0 & Bitstream sources. The analog Line In on the Transmitter sends audio directly to the analog Line Out and is inserted into the HDMI output on connected Receivers The Mic In on the Receiver sends audio directly to the analog Line Out on the Transmitter Both Tx and Rx may powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af) Receivers include 3 LAN ports, allowing multiple Receivers to be daisy chained without the need for an external Gigabit Ethernet switch Supports USB keyboard, mouse and storage extension Supports IR and RS-232 bypass Device has an info OSD and can be controlled via WebGUI, Telnet, and front panel controls Inputs 1x RJ45 [1x PoE Propriety Data / IP Control / LAN Serving] 2x RJ45 [2x Propriety Data / IP Control / LAN Serving] 1x 3.5mm Stereo Mini-jack [1x MIC IN Stereo(L/R)] 2x USB Type A [2x USB 1.1 Propriety Data] 2x USB Type A [2x USB 2.0 Propriety Data] 1x 9-pin D-sub [1x RS-232 Data] 1x 3.5mm Stereo Mini-jack [1x IR IN Infrared Receiver] Outputs 1x HDMI [1x Uncompressed AV and Data] 1x 15-pin D-sub [1x VGA RGBHV] 1x 3.5mm Stereo Mini-jack [1x LINE OUT Stereo(L/R)] 1x TOSLINK [1x OPTICAL 2 Channel LPCM] 1x 3.5mm Stereo Mini-jack [1x IR OUT Infrared Emitter] PSU: 5V/4A Dimensions 231mm [W] x 120mm [D] x 25mm [H] Net Weight 666g
|