The 8×8 HDMI Matrix with simultaneous CAT6 and HDMI outputs from Cypress Technology connects eight HDMI sources to 16 displays. This matrix features 8 HDMI outputs and each HDMI output is mirrored to provide a Dual-CAT-Cable output which runs simultaneously. Connect a CH-1106RX Receiver to each of the Dual-CAT-Cable outputs to extend the HDMI signal up to 45m for multi-room connectivity.This matrix switcher can be controlled via the supplied IR Remote Control, RS-232, Telnet or by using the selection buttons on the front panel. Additionally, this Cypress device supports ‘Deep Color', High Definition Audio, and 3D signal compatibility.

This Cypress product provides users with the following benefits;

• Multi-zoned HD installations
• HD and AVR Sub-zone installation
• Video and TV wall display and control
• Security surveillance and control
• Commercial advertising, display and control
• University Lecture hall display and control
• Retail demonstration and sales

Features

• HDMI, HDCP 1.1 and DVI compliant
• Supports HDMI 3D pass-through
• Supports resolutions from VGA~WUXGA@60 (RB) and HD resolutions from 480i~1080p
• Supports transmission distances up to 45 meters through Dual CAT6 cables
• Supports 3D signal display dependent upon the display's EDID settings
• Supports simultaneous HDMI and CAT6 outputs
• Supports HDMI input up to 15 meters at 8-bit resolution or 10 meters at 12-bit resolution
• Supports CAT output up to 45 meters at 8-bit resolution
• Supports IR pass-back through CAT for source control
• Supports RS-232, remote control, on-panel control and IP Control (Telnet)
• 2U size design
• Supports external and internal EDID settings
• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission

Note:

• Tested with CAT-6/23AWG cable, results may vary with cables of a different specification.
• Cable distance tested with a Sony PS3 40G, 37" Philips 8-bit LCD TV and 37" Samsung 12-bit LCD TV.
• Figures provided in this manual are for reference only, actual figures may vary
• Do not connect the LAN/CONTROL port to CAT outputs of this device.

Note: The model is under development. All the statements and the specifications mentioned on the website or the draft manual are for reference only