Products
NEW and HOT Products
- 2025 -
CV/SV, VGA PC and Component Splitters / Switchers / Boosters / Equalisers
Multisystem TV Pattern Generators
Digital Mixers / Time Base Correctors
Video Scalers
HDMI/DVI Video Splitters/ Switcher/ Booster/ Equalizers
Video Format Converters
HDMI/DVI Signal Format Converters
Colour Quad, Video Wall and PIP Processors
PC Multimedia
Digital and Analog Audio Format Converters
CAT5e/6/7, Optical Fibre, Co-Axial Cable Products
Other Products
SDI
New Product
CEC / EDID / IR / IP / Wall Plate Controllers
View All
Cypress Technical Information
Contact Us

Product Search

Search

Purchase Here


 
New Products
CAT5e/6/7, Optical Fibre, Co-Axial Cable Products
Make An Inquiry

CPLUS-44PLV - 4K HDR 4×4 HDMI over HDBaseT Matrix with IR, RS-232 & PoH (PSE)

​This Matrix supports routing and transmission of video (resolutions up to 4K@60Hz w/ HDMI 2.0 & HDCP 2.2) and audio (multi-channel digital/stereo analog) while providing flexible control via IR, RS-232, Telnet or WebGUI. As many as four UHD sources may be routed to any of four destinations via a single Cat.5e/6/7 cable (up to 70m at 1080p or up to 35m at 4K). Despite HDBaseT’s 10.Gbps bandwidth limitation, 4K UHD HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR, are able to be processed and extended by the use of AVLC (Adaptive Visually Lossless Compression) when connected to a compatible AVLC Receiver.

This product also provides an array of options for routing audio. To start, it supports passing 7.1 channel LPCM digital audio as well as advanced Bitstream and HD Bitstream audio formats via HDMI/HDBaseT. Additionally, four analog audio outputs are available to provide stereo breakout zone audio from the associated HDBaseT output (LPCM 2.0 sources only).

Internally generated test patterns (up to 4K@60Hz) are provided to assist with setup, providing a simple way to verify both matrix and sink functionality. The 48V PoH (Power over HDBaseT) function can provide power to compatible receivers, providing greater flexibility in installations. Control is via manual selection buttons, WebGUI, Telnet, RS-232 or IR remote.

SPECIFICATIONS:
​HDMI 2.0 and HDBaseT 1.0 compatible
HDCP 1.4 and HDCP 2.2 compliant
Routes four HDMI sources to four displays using four HDBaseT outputs
Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input and output
Note: Support of resolutions requiring bandwidth above 10.2Gbps via HDBaseT requires a compatible AVLC Receiver.
Supports Deep Color input and output up to 12-bit
Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output
HDBaseT feature support: HD Video and Audio, 48V PoH and Control (bidirectional IR/RS-232 pass-through)
Supports standard 48V PoH from the unit (PSE) to connected HDBaseT Receivers (PD) (compatible Receivers only)
HDBaseT outputs provide simultaneous transmission of uncompressed video, audio and data over a single Cat.5e/6/7 cable up to 70m/230ft at 1080p and 35m/115ft at 4K
Integrated AVLC (Adaptive Visually Lossless Compression) activates when the bandwidth requirements of the source are beyond 10.2Gbps (340MHz) allowing for support of sources up to 18Gbps (600MHz) with no loss of visual quality
The AVLC function allows manual selection between High Quality (Full bandwidth) and Medium Quality modes (Lower bandwidth, useful for longer cable runs with 4K sources)
Supports automatic 4K@60Hz RGB/YUV 4:4:4 to YUV 4:2:0 conversion for compatibility with non-AVLC HDBaseT Receivers
Supports pass-through of all standard digital audio formats: LPCM 2.0/5.1/7.1, Bitstream, and HD Bitstream
High-quality Digital to Analog audio Conversion (DAC)
Advanced internal and external EDID management with 4 sets of configurable EDID settings
Basic internal test pattern generation with test signals up to 4K@60Hz for testing video paths
Per-output OSD Banner Information function
Control via front panel controls, Ethernet (Telnet & WebGUI), RS-232, & IR remote
1U rack mounted design

Inputs
4x HDMI [4x Uncompressed AV and Data]
4x 3.5mm [4x Infrared Receiver]
1x 3.5mm [1x IR ALL Infrared Receiver]
1x DE-9 [1x RS-232 Data]
1x RJ-45 [1x IP Control]
1x USB Type-A [1x Propriety Data]
Outputs
4x RJ-45 [4x HDMI & Propriety Data]
8x RCA [4x Stereo (L/R)]
4x 3.5mm [4x Infrared Emitter]
1x 3.5mm [1x IR ALL Infrared Emitter]
PSU: 24V/6.25A
Dimensions: 482mm [W] x 279mm [D] x 49mm [H]
Net Weight: 3642g


4K HDR 4×4 HDMI over HDBaseT Matrix with IR, RS-232 & PoH (PSE) - Front View 4K HDR 4×4 HDMI over HDBaseT Matrix with IR, RS-232 & PoH (PSE) - Back View