NEW and HOT Products
- 2021 -
CV/SV, VGA PC and Component Splitters / Switchers / Boosters / Equalisers
Multisystem TV Pattern Generators
Digital Mixers / Time Base Correctors
Video Scalers
HDMI/DVI Video Splitters/ Switcher/ Booster/ Equalizers
Video Format Converters
HDMI/DVI Signal Format Converters
Colour Quad, Video Wall and PIP Processors
PC Multimedia
Digital and Analog Audio Format Converters
CAT5e/6/7, Optical Fibre, Co-Axial Cable Products
Other Products
New Product
CEC / EDID / IR / IP / Wall Plate Controllers
View All
Cypress Technical Information
Contact Us

Product Search


Purchase Here

New Products
CAT5e/6/7, Optical Fibre, Co-Axial Cable Products
Make An Inquiry

CSC-6012RX - HDBaseT to Dual HDMI Scaler with Audio Re-embedding

​This HDBaseT to Dual HDMI Scaler can receive uncompressed audio/video along with control, Ethernet, and extra audio data over a single run of Cat.5e/6/7 cable up to 100m. While the HDBaseT input is limited to a maximum of 4K@60Hz (4:2:0), this unit can automatically convert or scale the input to output at 4K@60Hz (4:4:4) depending on the detected capability of the connected display. Simple 6G HDMI test patterns are also available to be output for easy testing of local equipment. Control of remote devices is possible via bi-directional RS-232, IR ports as well as a LAN connection. Digital OAR (Optical Audio Return) support at 48kHz and a balanced analog audio output provides users with additional audio flexibility. The 48V PoH design can receive power from the connected Transmitter (PSE), eliminating the need for a local power supply, however power via 5V power supply is also supported if needed.

​HDBaseT 5Play™ convergence: High-Definition video and audio, 100BaseT Ethernet, PoH (Power over HDBaseT) and control (Bi-directional IR/RS-232 pass-through)
4K@60Hz (YUV 4:2:0) signals can be transmitted up to 100m via Cat.7 cable and up to 70m via Cat.5e/6 cable
Fully compliant with HDMI 1.4 and compatible with HDMI 2.0 (4K@60Hz, YUV 4:2:0) as well as
Supports DVI to HDMI conversion and HDCP 2.2 compliance
Bypasses signal on both HDMI outputs or output B can upscale 1080p signals to 4K and output A can downscale a 4K signal to 1080p (same framerate is maintained)
Supports automatic 4K@60Hz RGB/YUV 4:4:4 to YUV 4:2:0 conversion for HDBaseT output
Support signal bypass on HDMI output
Supports data rates up to 600MHz/18Gbps and Deep Color up to 48-bit
Supports 4K resolutions including: 3840×2160@24/25/30Hz, 4096×2160@24/25/30Hz, 3840×2160@50/60Hz (4:4:4) & 4096×2160@50/60Hz (4:4:4)
Supports pass-through of all standard digital audio formats: LPCM 2.0/5.1/7.1, bitstream, and HD bitstream
Supports OAR (Optical Audio Return) and DAC (Digital to Analog Conversion) audio balance conversion
Support optical sampling rates up to 48kHz
Internal test pattern generation at select resolutions for on-site display testing
Integrated EDID management
OSD with instant I/O resolution display
Supports 10/100 Ethernet network
Supports RS-232 baud rates from 110~115200bps

Inputs 1x RJ45 [1x HDMI & Propriety Data]
1x TOSLINK [1x OPTICAL 2 Channel LPCM]
1x 3.5mm Stereo Mini-jack [1x Infrared Receiver]
3x 1-Pin Terminal Block [1x RS-232]
Outputs 2x HDMI [2x Uncompressed AV and Data]
1x 5-Pin Terminal Block [1x Stereo (Balanced)]
1x 3.5mm Stereo Mini-jack [1x Infrared Emitter]
PSU: 5V/2.6A
Dimensions 231mm [W] x 117mm [D] x 25mm [H]
Net Weight 670g

HDBaseT to Dual HDMI Scaler with Audio Re-embedding - Front View HDBaseT to Dual HDMI Scaler with Audio Re-embedding - Back View
Download Manual PDF Manual