|
CSC-6012TX - HDMI to HDBaseT Scaler with Audio De-embedding This HDMI to HDMI/HDBaseT Scaler can send uncompressed audio/video along with control, Ethernet, and extra audio data over a single run of Cat.5e/6/7 cable up to 100m. Both the HDMI input and local HDMI output support video signals up to 4K@60Hz (4:4:4, 8-bit). For transmission over the HDBaseT output the signal can be converted to 4K@60Hz (4:2:0, 8-bit) or 1080p@60Hz, if necessary, in order to fit within HDBaseT bandwidth limitations. Simple 6G HDMI test patterns are also available to be output. Control of remote devices is possible via bi-directional RS-232, IR ports as well as a LAN connection. A balanced analog audio output provides users with additional audio flexibility. The 48V PoH design can power the connected Receiver (PD), eliminating the need for an extra power supply while the Transmitter itself is powered through the local 24V power supply. HDBaseT 5Play™ convergence: High-Definition video and audio, 100BaseT Ethernet, PoH (Power over HDBaseT) and control (Bi-directional IR/RS-232 pass-through) 4K@60Hz (YUV 4:2:0) signals can be transmitted up to 100m via Cat.7 cable and up to 70m via Cat.5e/6 cable Fully compliant with HDMI 1.4 and compatible with HDMI 2.0 (4K@60Hz, YUV 4:2:0) as well as Supports DVI to HDMI conversion and HDCP 2.2 compliance Upscales 1080p signals to 4K over HDBaseT output or downscales 4K signal to 1080p (same framerate is maintained) Supports automatic 4K@60Hz RGB/YUV 4:4:4 to YUV 4:2:0 conversion for HDBaseT output Support signal bypass on HDMI output Supports data rates up to 600MHz/18Gbps and Deep Color up to 48-bit Supports 4K resolutions including: 3840×2160@24/25/30Hz, 4096×2160@24/25/30Hz, 3840×2160@50/60Hz (4:4:4) & 4096×2160@50/60Hz (4:4:4) Supports pass-through of all standard digital audio formats: LPCM 2.0/5.1/7.1, bitstream, and HD bitstream Supports OAR (Optical Audio Return) and DAC (Digital to Analog Conversion) audio balance conversion Internal test pattern generation at select resolutions for on-site display testing Integrated EDID management OSD with instant I/O resolution display Supports 10/100 Ethernet network Supports RS-232 baud rates from 110~115200bps Inputs 1x HDMI [1x Uncompressed AV and Data] 1x 3.5mm Stereo Mini-jack [1x Infrared Receiver] 3x 1-Pin Terminal Block [1x RS-232] 1x RJ45 [1x LAN Serving] Outputs 1x HDMI [1x Uncompressed AV and Data] 1x RJ45 [1x HDMI & Propriety Data] 1x 5-Pin Terminal Block [1x Stereo (Balanced)] 1x 3.5mm Stereo Mini-jack [1x Infrared Emitter] PSU: 24V/2.7A Dimensions 231mm [W] x 117mm [D] x 25mm [H] Net Weight 648g
|