Products
NEW and HOT Products
- 2019 -
CV/SV, VGA PC and Component Splitters / Switchers / Boosters / Equalisers
Multisystem TV Pattern Generators
Digital Mixers / Time Base Correctors
Video Scalers
HDMI/DVI Video Splitters/ Switcher/ Booster/ Equalizers
Video Format Converters
HDMI/DVI Signal Format Converters
Colour Quad, Video Wall and PIP Processors
PC Multimedia
Digital and Analog Audio Format Converters
CAT5e/6/7, Optical Fibre, Co-Axial Cable Products
Other Products
SDI
New Product
CEC / EDID / IR / IP / Wall Plate Controllers
View All
Cypress Technical Information
Contact Us

Product Search

Search

Purchase Here


 
New Products
CEC / EDID / IR / IP / Wall Plate Controllers
Make An Inquiry

COH-TR7 - 4K UHD+ HDMI/DisplayPort over IP Transceiver with USB Extension

This Transceiver is designed for high-quality, IP routable, AV extension with minimum latency. Every Transceiver can be configured to function as either a Transmitter or a Receiver, enhancing the flexibility of any installation. By using a sophisticated ultra-light compression scheme (lossless for most content) it’s a great solution for extending 4K audio/video streams (HDMI or DisplayPort) and data. Advanced HDMI content such as HDR (High Dynamic Range), 10- bit color and multi-channel HD Bitstream audio can be transmitted in passthrough mode. The use of interchangeable, field replaceable, SFP+ modules allows for transmission distances of up to 30km (Maximum transmission distance depends on the SFP+ modules used). Multiple control and data signals may also be transmitted along with the audio and video, including IR, RS-232, USB 2.0, and Ethernet.

When combined with the optional control center or control software, the functionality of the Transceiver expands exponentially. Multiple Transceivers may be combined with one or more 10-Gigabit fiber Ethernet switches and the units can be used together to form a distributed video matrix, a multiviewer system, or a video wall system adding to their flexibility in large event installations. The integrated USB hub of each Transceiver can be configured to be in USB Host or Device Mode and can function as a simple point to point KVM extension, freely routed between any two endpoints, or it can be configured into a special “Simultaneous” mode, allowing up to 7 Host Mode Transceivers to extend their USB ports to a single Device Mode Transceiver. This type of USB KVM routing flexibility enables a wide range of multi-user, control room, or ondemand installation scenarios.

The built-in EDID and HDCP management functionality enables the unit to fit into every situation. Basic configuration of the unit can be achieved via front panel buttons with an On-Screen Display (OSD). Advanced control requires optional control center, or control software, and a LAN connection.

SPECIFICATIONS:
• HDMI 2.0 and DVI 1.0 compatible
• HDCP 2.2 and HDCP 1.x compliant
• Can be configured to function as either a Transmitter or a Receiver
• 1 HDMI and 1 DisplayPort input
• 1 HDMI output (Functions as local monitor output in Transmitter mode)
• 1 analog stereo jack (Functions as an input in Transmitter Mode or an output in Receiver Mode)
• 3 USB Type-A ports and 1 USB Mini-B port
• IP switchable with minimum latency (requires optional control center or control software)
• Ultra-light compression, lossless for most content
• Extension up to 30km (maximum distance depends on the SFP+ module and type of fiber used)
• Independent breakaway A/V matrix switching (requires optional control center/software)
• Video wall generation (requires optional control center or control software)
• Multi-view compositing (requires optional control center or control software)
• Supports pass-through of 10/12-bit HDR sources (Point-to-point and Genlock modes only)
• Supports pass-through of audio formats including LPCM (up to 8 channels), Bitstream and HD Bitstream from HDMI sources
• Analog stereo audio extension, insertion and extraction (insertion and extraction requires optional control center or control software)
• Bi-directional IR, RS-232, USB 2.0, and Ethernet extension
• Supports a special Simultaneous Mode for USB extension allowing a host connected to a single Transceiver to connect to up to 7 Transceivers with USB devices connected (mass storage devices are not supported in this mode)
• Signal transmission interfaces with 10-Gigabit Ethernet switches via XFI (IEEE 802.3ae) compatible SFP+ fiber modules
• Basic configuration via front panel buttons with an On-Screen Display (OSD)
• Supports the use of an external control center or control software to provide expanded functionality (Contact your authorized dealer for more information)

Inputs
1x HDMI [1x Uncompressed AV and Data]
1x DisplayPort [1x Uncompressed AV]
1x 3.5mm [1x Stereo(L/R)]
1x 3.5mm [1x Infrared Receiver]
1x RJ-45 [1x IP Control]
3x 1-Pin Terminal Block [1x RS-232]
2x USB Type-A [2x Propriety Data]
Outputs
1x HDMI [1x Uncompressed AV and Data]
1x 3.5mm [1x Infrared Emitter]
1x LC-LC Duplex Multimode 62.5-125 Fibre [1x HDMI & Propriety Data]
PSU: 12V/3A
Dimensions 231mm [W] x 25mm [D] x 158mm [H]
Net Weight 916g


4K UHD+ HDMI/DisplayPort over IP Transceiver with USB Extension - Front View 4K UHD+ HDMI/DisplayPort over IP Transceiver with USB Extension - Back View