The HDMI over Single CAT5e/6/7 Extender with LAN/PoE/RS-232/IR transmitter and receiver set can send uncompressed audio/video and IP data over a single run of CAT5e/6/7 cable at a distance up to 100 meters. It has the added benefit of control through the built-in RS-232 and IR ports and a bi-directional LAN serving connection. The receiver (PD) can be powered by the PoE (48V) function of the transmitter (PSE), allowing for greater flexibility in installations.
HDMI 1 by 8 splitter transfer 3D content, Deep Color (10-bit and 12-bit) video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, HDMI 1 by 8 splitter does not only handle splitting and distributing but it also amplifies and equalizes the signals to provide high-performance input/output of audio and video.
The CP-1269HM high performance cable equalizer can extend HDMI/DVI cable distance up to total 60 meters from the source to the display. It corrects digital error and automatically provides equalization up to 40dB to compensate for cable transmission loss.
The HDMI™ 3 to 1 Switcher allows 3 HDMI sources to be connected to the same HDMI TV/Monitor input. It has IR, automatic, and manual input selection and a 'last memory' function that remembers the last input selection used.
The HDMI v1.3 Distribution Amplifier Series is the most advanced solution to HDMI signal distribution which is compatible to HDMI v1.3 specifications, supports transfer Deep Color (10-bit and 12-bit) video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, with a high bandwidth up to 225MHz (6.75Gbps).
This input module enables the connection of up to 8 HDMI sources to the modular matrix. Resolutions up to 4K@30Hz or WUXGA@60Hz (RB), and 3D signals are supported along with high-definition audio transmission including LPCM 7.1CH, Dolby Digital Plus, Dolby True HD, and DTS Master Audio.
The 4 by 4 HDMI matrix with 4Kx2K supported on output D only which allows HDMI signal from any of its four sources to be routed to and displayed on any of its four connected HDMI displays simultaneously.
This 4K2K capable HDBaseT™ HDMI to HDMI and CAT5e/6/7 Transmitter supports the transmission of video (resolutions up to 1080p/4K2K) and multi-channel digital audio to eight remote HDBaseT CAT5e/6/7 outputs, plus an additional HDMI output which can be connected to a local HDMI display for monitoring.
The DVI Splitter series are high performance, HDCP compliant DVI distribution amplifiers. It allows one DVI signal source to be split to two identical buffered outputs for connecting DVI displays simultaneously.
The Dual-Link DVI splitter allows a single DVI-D signal to be split into two/four DVI outputs. Accept both Single-Link and Dual-Link DVI signal with supporting the highest resolution of WQXGA for Dual-Link and WUXGA@RB for Single-Link DVI this wonderful device allows users with a multi-screen viewing.