Products
NEW and HOT Products
- 2025 -
CV/SV, VGA PC and Component Splitters / Switchers / Boosters / Equalisers
Multisystem TV Pattern Generators
Digital Mixers / Time Base Correctors
Video Scalers
HDMI/DVI Video Splitters/ Switcher/ Booster/ Equalizers
Video Format Converters
HDMI/DVI Signal Format Converters
Colour Quad, Video Wall and PIP Processors
PC Multimedia
Digital and Analog Audio Format Converters
CAT5e/6/7, Optical Fibre, Co-Axial Cable Products
Other Products
SDI
New Product
CEC / EDID / IR / IP / Wall Plate Controllers
View All
Cypress Technical Information
Contact Us

Product Search

Search

Purchase Here


 
New Products
HDMI/DVI Video Splitters/ Switcher/ Booster/ Equalizers
Make An Inquiry

CMSI-3232 - 32 by 32 Modular Matrix

The 32 by 32 Modular Matrix is designed to allow the switching and distribution of up to 32 source devices to up to 32 connected displays, either directly via HDMI, DVI or via CAT5e/6/7 outputs to compatible receivers, providing control options (dependent on module configuration). Providing unparalleled levels of flexibility, with an advanced modular design these models can be setup in a wide variety of combinations allowing users the ability to tailor the Matrix to their requirements by simply adding or removing the input or output modules as required.

The Modular Matrix is supplied with dual removable internal PSU's which allow for easy inspection and maintenance with zero down time. Also included is a DVI output for local monitoring of the output allowing installers to easily monitor, test, and configure the Inputs and Outputs on installation. In addition, this matrix also features IP control allowing users to access and control the matrix remotely and also allow additional options for integration of third-party control systems.

SPECIFICATIONS:
HDMI, HDCP 1.1 and DVI 1.0 compliant
Interchangeable input and output modules
Input and output module types can be mixed and added in multiples of 8 from 8×8 (1 Input module, 1 Output module) up to 32×32 (4 Input modules, 4 Output modules) with HDMI, DVI, CAT5e/6/7 and VGA (Input only) connection types
Supports a wide range of PC and HDTV resolutions from VGA to WUXGA and 480i to 1080p and 4K2K@24/25/30
Supports pass-through of LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
Supports control of the matrix via on-panel, RS-232, Telnet and WebGUI controls
Supports 10 available preset settings
Support 3 EDID modes: Standard, Dynamic and Manual
Dual removal power supply units
Supports HDMI cable input and output lengths of up to 15m each way (1080p@8-bit resolution), 10m (1080p@12-bit resolution) or 5m (4K2K@30 resolution)
Supports CAT5e/6/7 cable input and output lengths of up to 100m (1080p@8-bit/12-bit resolution) or 70m (4K2K@30 resolution) dependent on board capabilities
HDBaseT 5Play™ convergence supports HD Video, HD Audio, PoC, Ethernet and IR/RS-232 Control
HDBaseT 4Play convergence supports HD Video, HD Audio, PoC and IR/RS-232 Control
HDBaseT 3Play convergence supports HD Video, HD Audio and IR/RS-232 Control

Inputs 32x HDMI [32x Uncompressed AV and Data]
1x 9-pin D-sub [1x RS-232 Data]
1x RJ45 [1x IP Control]
1x USB Mini-B [1x SERVICE Propriety Data]
1x 3.5mm Stereo Mini-jack [1x RESERVED Infrared Receiver]
Outputs 32x HDMI [32x Uncompressed AV and Data]
PSU: 110V/220V
Dimensions 482mm [W] x 494mm [D] x 233mm [H]
Net Weight 15000g


32 by 32 Modular Matrix - Front View 32 by 32 Modular Matrix - Back View