This unit is design for multi-purpose and multi-task trigger system usage. With 8 relays to trigger, 8 PWM (Pulse-Width Modulation) to set duty cycle, 8 voltage to set trigger voltage and 1 definition to control through command setting which supports RS-232/422/485 and DM512 that allows up to 25 devices connection for control. Device’s control interfaces like RS-232 and Telnet and PoE PD inside design leads user with completely friendly usage.

SPECIFICATIONS:
Supports 8 Relays, 8 PWM, 8 Voltage and 1 Definition outputs
Reply supports close, open and toggle controls with LED illuminators and power up to 30V/DC, 10A
PWM support 10 volt with 0~100% duty cycle adjustable
Voltage outputs supports from 0~10 volt with adjustment from 0~100% (0, 0.1, 0.2 ~10 volt)
Definition output supports RS-232/422/485 with adjustable baud rate
DMX-512 data transmission up to 250 Kbaud/s with unidirectional, serial transmission and daisy-chain configuration up to 512 nodes of max time 22ms (roughly 44Hz)
RS-232/Console supports up to 256 bytes per command
Supports 5V/2.6A ~ 24V/1.2A DC power supply
Supports USB and WebGUI firmware update
Supports RS-232 and Telnet controls
Control port supports PoE function
Inputs 1x RJ45 [1x IP Control]; 1x 9-pin D-sub [1x RS-232 Data]; 1x USB Type A [1x SERVICE Propriety Data]
Outputs 8x 2-Pin Terminal Block [8x Relay]; 1x 5-Pin Terminal Block [1x RS-232/422/485/DMX512]; 8x 2-Pin Terminal Block [8x PWM OUT (10V) Power Block]; 8x 2-Pin Terminal Block [8x VOLTAGE OUT (0~10V) Power Block]
PSU: 5V/2.6A
Dimensions 200mm [W] x 95mm [D] x 31mm [H]
Net Weight 548g